H3C WA2612-AGN Web-Based Configuration Manual page 41

Field
HT protection mode
power(dBm)
Antenna Type
Resource Usage
Received: 2 authentication frames, 2
association frames
Sent out: 2 authentication frames, 2
association frames
Stations: 0 associating, 2 associated
Input : 70686 packets, 6528920 bytes
: 255 unicasts, 34440 bytes
: 70461 multicasts/broadcasts,
6494480 bytes
: 0 fragmented
: 414 discarded, 26629 bytes
: 0 duplicates, 3785 FCS errors
: 0 decryption errors
Description
802.11n protection modes:
•
no protection mode(0)—The clients associated with the AP,
and the wireless devices within the coverage of the AP
operate in 802.1 1n mode, and all the clients associated with
the AP operate in either 40 MHz or 20 MHz mode.
•
Non-member mode(1)—The clients associated with the AP
operate in 802.1 1n mode, but non-802.1 1n wireless devices
exist within the coverage of the AP.
•
20 MHz mode(2)—The radio mode of the AP is 40 MHz.
The clients associated with the AP and the wireless devices
within the coverage of the AP operate in 802.1 1n mode, and
at least one 802.1 1n client operating in 20 MHz mode is
associated with the radio of the AP.
•
Non-HT mix mode(3)—All situations except the above three.
Transmit power of the interface (in dBm).
Antenna type, which depends on the device model.
Current radio resource usage.
Number of authentication and association frames received.
Number of authentication and association frames sent.
Number of stations being associating and stations having been
associated.
Input packet statistics of the interface:
•
Number of packets, number of bytes.
•
Number of unicast packets, number of bytes of unicast
packets.
•
Number of multicasts/broadcast packets, number of bytes
of multicasts/broadcast packets.
•
Number of fragmented packets.
•
Number of discarded packets, number of discarded bytes.
•
Number of duplicate frames, number of FCS errors.
•
Number of encryption errors.
28