H3C WA2612-AGN Web-Based Configuration Manual page 174

Function menu
Loopback Test
MAC
VLAN
ARP
Manage
ment
Network
IGMP
Snooping
IPv4
Routing
IPv6
Routing
DHCP
Description
Configure SNMP.
Perform the loopback test on Ethernet
interfaces.
Display MAC address information.
MAC
Create or remove MAC addresses.
Display and configure MAC address aging
Setup
time.
Display all VLANs on the device and
information about their member ports.
VLAN
Create, modify, and delete VLANs.
Display VLANs to which a port on the device
belongs.
Port
Modify the VLANs to which a port belongs.
Display ARP table information.
ARP Table
Add, modify, or delete an ARP entry.
Display configuration information of
gratuitous ARP.
Gratuitous ARP
Configure gratuitous ARP.
Display global IGMP Snooping
configuration information and the IGMP
Snooping configuration information in a
VLAN, and view the IGMP Snooping
Basic
multicast entry information.
Configure IGMP Snooping globally and in a
VLAN.
Display the IGMP Snooping configuration
information on a port.
Advance
Configure IGMP Snooping on a port.
Summary Display the IPv4 active route table.
Create Create an IPv4 static route.
Remove Delete the selected IPv4 static routes.
Summary Display the IPv6 active route table.
Create Create an IPv6 static route.
Remove Delete the selected IPv6 static routes.
Display the DHCP service status, the DHCP
address pool information, and the DHCP
server status on an interface.
DHCP Server
Set the DHCP service status, add, modify, or
delete a DHCP address pool, and modify the
DHCP server status on an interface.
161
User level
Configure
Configure
Monitor
Configure
Configure
Monitor
Configure
Monitor
Configure
Monitor
Configure
Monitor
Configure
Monitor
Configure
Monitor
Configure
Monitor
Configure
Configure
Monitor
Configure
Configure
Monitor
Configure