H3C WA2612-AGN Web-Based Configuration Manual page 367

Figure 388 Configuring an basic IPv4 ACL
3. Configure a basic IPv4 ACL as described in
4. Click Add.
Table 113 Configuration items
Item
ACL
Rule ID
Action
Check Fragment
Description
Select the basic IPv4 ACL for which you want to configure rules.
Available ACLs are basic IPv4 ACLs.
Select the Rule ID option and enter a number for the rule.
If you do not specify the rule number, the system assigns one automatically.
IMPORTANT:
If the rule number you specify already exists, the following operations modify the
configuration of the rule.
Select the action to be performed for IPv4 packets matching the rule:
•
Permit—Allows matching packets to pass.
•
Deny—Drops matching packets.
Select this option to apply the rule to only non-first fragments.
If you do no select this option, the rule applies to all fragments and non-fragments.
354
Table 113.