H3C WA2612-AGN Web-Based Configuration Manual page 125

2. Enable IGMP snooping and the function of dropping unknown multicast data on VLAN 1 (where
GigabitEthernet 1/0/1 and WLAN-BSS 1 reside by default):
a. Click the
b. To enable IGMP snooping and the function of dropping unknown multicast data on VLAN 1:
Select the Enable option for IGMP Snooping.
Select the 2 option for Version.
Select the Enable option for Drop Unknown.
c. Click Apply.
Figure 114 Configure the VLAN
Verifying the configuration
Display the IGMP snooping multicast entry information on the AP:
1. Select Network > IGMP snooping from the navigation tree to enter the basic configuration page.
2. Click the plus sign (+) in front of Show Entries to view IGMP snooping multicast entries, as shown
in Figure
Figure 115 IGMP snooping multicast entry information displaying page
3. Click the
shown in
224.1.1.1.
icon corresponding to VLAN 1.
115.
icon corresponding to the multicast entry to view information about this entry, as
Figure 116. The page shows that WLAN-BSS 1 of the AP is added to multicast group
112