H3C WA2612-AGN Web-Based Configuration Manual page 384
Wa2600 series; wa2600 series; wa2600 series; wa2600 series; wa3600 series; wa3600 series
Hide thumbs
Also See for WA2612-AGN:
- Installation manual (13 pages) ,
- Fundamentals configuration manual (137 pages) ,
- Command reference manual (131 pages)
Table of Contents
Advertisement
Item
DSCP
IP Precedence
Classifier
Inbound Interface
RTP Port
Service 802.1p
Dot1p
Customer
802.1p
Description
Define a rule to match DSCP values.
If multiple such rules are configured for a class, the new configuration does not
overwrite the previous one.
You can configure up to eight DSCP values each time. If multiple identical DSCP
values are specified, the system considers them as one. The relationship
between different DSCP values is OR. After such configurations, all the DSCP
values are arranged in ascending order automatically.
Define a rule to match IP precedence values.
If multiple such rules are configured for a class, the new configuration does not
overwrite the previous one.
You can configure up to eight IP precedence values each time. If multiple
identical IP precedence values are specified, the system considers them as one.
The relationship between different IP precedence values is OR. After such
configurations, all the IP precedence values are arranged in ascending order
automatically.
Define a rule to match a QoS class.
IMPORTANT:
This configuration item is not supported.
Define a rule to match inbound interfaces.
IMPORTANT:
This configuration item is not supported.
Define a rule to match a range of RTP ports.
Specify the start port in the from field and the end port in the to textbox.
IMPORTANT:
This configuration item is not supported.
Define a rule to match the service 802.1p precedence values.
If multiple such rules are configured for a class, the new configuration does not
overwrite the previous one.
You can configure up to eight Dot1p values each time. If multiple identical
Dot1p values are specified, the system considers them as one. The relationship
between different Dot1p values is OR. After such configurations, all the Dot1p
values are arranged in ascending order automatically.
IMPORTANT:
This configuration item is not supported.
Define a rule to match the customer 802.1p precedence values.
If multiple such rules are configured for a class, the new configuration does not
overwrite the previous one.
You can configure up to eight Dot1p values each time. If multiple identical
Dot1p values are specified, the system considers them as one. The relationship
between different Dot1p values is OR. After such configurations, all the Dot1p
values are arranged in ascending order automatically.
371
Hide quick links:
Advertisement
Table of Contents
