Viewing Service Records; Recording Service Activities - Siemens SONOLINE G50 Service Manual

Service Screens and Menus
The display of the Service History screen is configured for service data entry
(Figure 8-24) when it opens; the History List field displays Today and the Date
of Service field displays the present date. The Service Engineer Name remains
blank and each of the service category keys displays an initial default.

6.10.1 Viewing Service Records

Service activities are recorded and recalled according to the date entered in
the Date of Service field. Once entered, the date of service is listed in the drop-
down History List combo box. To view a service record, open the drop-down
History List combo box and select the date of the service; select the View
button located at the bottom of the screen to display the key and memo data
recorded for the service activity performed on that date.
View the fields located below the History List to rapidly determine if the
displayed record is the record that you wish to review. See "Field Descriptions"
(page 8-35) for a description of the Key fields.

6.10.2 Recording Service Activities

Each service record allows the service engineer to enter key data in the fields
labeled Key 1 through Key 5. These key field entries can be used to categorize
the nature of the service activity for rapid review in the future.
Page 34 of 42
Service
Service History
Site
System
History List
Today
HW / SW
Date of Service
DD /
Service Engineer Name
Key 1
Key 2
Diagnostics
Key 3
Log
Service History
Key 4
Backup / Restore
Key 5
Figure 8-24 Service History Screen
Memo
MM / YYYY
Select
Select
Select
Select
Select
View
7482255 Rev 01
October 2002
Home
Input Save
Siemens