Service; Warranty; Ordering Information - Siemens Hematek 3000 System Instruction Manual

1 Introduction
Gray note
1
1.3

Service

1.4

Warranty

1.5

Ordering information

1 2
Gray notes indicate important background information.
Example:
Note: Once the shift change has been activated, it cannot be
interrupted.
Siemens and its representatives are available to repair the system during
customary local office hours. Should you require service at any other time,
contact the Siemens service or your local Siemens representative. In the
following, Siemens service refers to both, the Siemens service or any local
representative authorized by Siemens. You will receive information about
how to reach the Siemens service when the system is installed, or visit
www.siemens.com/diagnostics to find contact information.
The scope of agreed service is included in your service contract.
Siemens and its representatives guarantee that the system shows no
defects during operation if installed and operated according to this manual.
For more information about warranty, contact the Siemens service.
The warranty is not valid for damage that occurs as a consequence of non-
observance of this manual.
Repairs and servicing must only be carried out by persons authorized by
Siemens.
Only perform maintenance as described in this manual. Improper
interventions on the system void the warranty and can result in service
charges.
Only use the system as intended. If the system is not used as intended,
Siemens disclaims all liability for damage to the system.
Use only original Siemens consumables, accessories and spare parts.
Order these only from Siemens. For ordering information, see the Siemens
product catalog or contact the Siemens service.
®
Hematek 3000 System – Instruction Manual – Version 1.3