Siemens SONOLINE G50 Service Manual page 61

Chapter 4 - Removing and Replacing Spare Parts
4. Loosen the two screws located at the bottom of the front cover, and pull out
The screws designated as CK3x8 in Figure 4-13 are M3x8 binding head screws with exter
nal lock washers. The CK4x8 screws are M4x8 binding head screws with external lock
washers. The screws designated as S3x8 are M3x8 flat head screws. See "Fastener Refer
ence" (page H-1).
5. Unfasten three pairs of magic fasteners joining the front cover and the G50
Siemens
the top edge of the cover as shown in Figure 4-16.
Figure 4-16 Removing the Front Cover
Figure 4-17 Removing the Top Cover
or the G60 S (Figure 4-16).
SVO 9500
7482255 Rev 01
October 2002
M4x10 screws
Page 19 of 52