Fastener Reference; H-1 Fastener Characteristics - Siemens SONOLINE G50 Service Manual

Appendix H - Fastener Reference
Appendix H: Fastener Reference
The threaded fasteners employed in the assembly of the G50 and the G60 S exhibit the
characteristics listed in Table H-1. See Figure H-1 for an example of the S3x8 screw, and
Figure H-2 for an example of the CK3x8 screw.
Screw Reference
S3x6
S3x8
CK3x4
CK3x6
CK3x8
CK4x8
S4x10
CK4x12
CR5x10
Siemens
Table H-1 Fastener Characteristics
Screw Dimensions Screw Type
M3x6 Flat head
M3x8 Flat head
M3x4 Binding head, with external lock washer
M3x6 Binding head, with external lock washer
M3x8 Binding head, with external lock washer
M4x8 Binding head, with external lock washer
M4x10 Flat head
M4x12 Binding head, with external lock washer
M5x10 Pan head, with spring lock and flat washers
Figure H-1 S3x8 (M3x8 Flat Head Screw)
Figure H-2 CK3x8 (M3 Binding Head with External Lock Washer)
7482255 Rev 01
October 2002
Page 1 of 2