Chapter 4 - Removing and Replacing Spare Parts
7.4 Confirming the Operation of the Keyboard
1. Connect the system power cable to a properly grounded outlet.
2. Connect a transducer to the G50 or the G60 S.
3. Turn the power switch On.
4. Turn the Standby switch On.
5. Confirm that a B-mode image is displayed on the monitor.
6. Confirm that each LCD display changes every time you press a soft key
7. Press the F4 key and confirm that Preset Main Menu is displayed on the
Siemens
located next to the LCD cell.
monitor.
7482255 Rev 01
October 2002
Page 35 of 52