Control Buttons; Cancel Message Box - Siemens SONOLINE G50 Service Manual

Chapter 8 - Software
Field Group
Location
Customer or
Administrator
Memo

6.2.2 Control Buttons

Three control buttons appear at the bottom of the Site Information screen:
Input, Cancel, and Save; these control the editing of the data fields located on
the screen.
„ Input: Selecting the Input button allows the user to edit the data fields.
„ Cancel: Selecting the Cancel button displays the message box shown in
„ Save: Selecting the Save button displays the message, "Do you want to
Siemens
Table 8-4 Data Fields (Sheet 2 of 2)
Field Title
Location
Name
ID
Memo
See "Cancel Message Box" on page 8-23. Select the OK button to re-dis-
play the information saved in the system memory. Selecting the Cancel
button, located in the cancel message box, returns the screen to the state
that existed before the Cancel button was pressed.
Cancel
Do you want to revert to saved data?
Ok
Figure 8-12 Cancel Message Box
save changes?" After display of the message, selecting the OK button
saves the data that is currently displayed in the data fields. Selecting the
Cancel button, after display of this message, returns the screen to the state
that existed before the Cancel button was pressed.
Comment
Enter the building or room number in which the system
is located.
Enter the name of the individual who is responsible for
the system.
Enter the identity number of the responsible individual.
Enter additional information that must be associated
with the system.
Cancel
7482255 Rev 01
October 2002
X
Page 23 of 42