System Configuration Screen For Peripherals - Siemens SONOLINE G50 Service Manual

Service Screens and Menus
The System Configuration Software screen displays the installed software
applications according to the name, sub-name, and build or version number of
each application.
The list includes software options installed in the Preset, listing these software
options as Option in the sub-name column and representing their versions as a
hyphen.
If the complete list of the software applications cannot be displayed on this
screen, a scroll bar appears to the right of the screen. Use the scroll bar to view
the complete list of installed software.

6.6 System Configuration Screen for Peripherals

Access the System Configuration screen shown in Figure 8-15 by selecting the
HW/SW button located on the Main Menu screen (Figure 8-10).
Select the radio button labeled Peripheral that is located on the right side of the
System Configuration screen to display the System Configuration Peripheral
screen.
Ten data rows are provided on this screen for recording the Equipment Name /
Memo for the peripherals installed on the system.
Page 26 of 42
Service
System Configuration - Software
No.
Site
1
2
System
3
HW / SW
4
Diagnostics
Log
Service History
Backup / Restore
Figure 8-16 System Configuration Screen for Software
NAME Sub Name Build / Ver. No.
OS Windows CE 3.00
Omnia-X Omnia-X 1.0.000
TDI Option -
TDI Option -
7482255 Rev 01
October 2002
Home
Hardware
Software
Peripheral
Siemens