Component Locations; Host Module And Dimaq-Ip Circuits - Siemens SONOLINE G50 Service Manual

Component Locations

The DIMAQ-IP module contains a hard disk drive (HDD), a writable compact disc
(CD-R/W), universal serial bus (USB) ports, and external Ethernet ports. The USB
port supports only the Stress-Echo report printing applications; it cannot be used for
any other application. The external Ethernet port is inactive and is reserved for
future applications.
G 60 S Host Box
G 60 S Host Box
SDRC
SDRC
ASIC
ASIC
2.0 Component Locations
Photographs in this section show the location of the major components of the G60 S
system. The actual location of components and modules does not vary between the
G50 and the G60 S.
Some visible differences exist between the G50 and the G60 S components.
Photographic comparisons of those G50 components that differ in appearance are
provided where relevant.
Spare part numbers for the two systems are different, though many of the visible
differences between the G50 and the G60 S are just differences of color; see
Figure 2-4 and Figure 2-5. Spare parts are listed in "Spare Parts" (page C-1).
For a complete listing of all major components, see "Component Designations"
(page F-1). For a listing of the system spare parts, see "Spare Parts" (page C-1).
Page 8 of 16
Host Module
Omina X/XS
Omina X/XS
Display
Display
DAC DAC
TBCC TBCC
(FPGA)
(FPGA)
PPCL PPCL
LUT LUT
PCB
PCB
RGB
RGB
Keyboard Keyboard
Control Panel Control Panel
Figure 2-1 Host Module and DIMAQ-IP Circuits
DIMAQ-IP
(Standard on G60 S; Option on G50
SVGA Output
SVGA Output
VGA Output
VGA Output
SPCL PCB
SPCL PCB
(PCI Bus
(Serial Cable) (PCI Bus
(Serial Cable)
Card)
Card)
Local
Local
USB + Ethernet
USB + Ethernet
Ethernet
Ethernet
7482255 Rev 01
October 2002
IPPC
DIMAQ-IP DIMAQ-IP IPPC
System
System
Memory
Memory
HDD
HDD
CDR/W CDR/W
USB Ethernet
USB Ethernet
Siemens