General; About This Manual; Target Group; Hints For The Online Edition (Pdf Format) - Kollmorgen SERVOSTAR 640 Instruction Manual

Kollmorgen
1

General

1.1

About this manual

This manual describes the digital servo amplifiers of the SERVOSTAR
(standard version).
A more detailed description of the expansion cards which are currently available and the digital
connection to automation systems can be found on the accompanying CD-ROM in Acrobat-Reader
format (system requirements: WINDOWS with Internet browser, Acrobat Reader) in several
language versions.
Technical data and dimensional drawings of accessories such as cables, brake resistors, mains
supplies, etc., can be found in the accessories manual.
You can print this documentation on any standard printer. A printed copy of the documentation is
available from us at extra cost.
More background information can be found in the "Product WIKI", please check
www.wiki-kollmorgen.eu.
1.2

Target group

This manual addresses personnel with the following qualifications:
Transport :
Unpacking:
Installation : only by electrically qualified personnel.
Setup :
The qualified personnel must know and observe the following standards:
During operation there are deadly hazards, with the possibility of death, severe
injury or material damage. The operator must ensure that the safety instructions in
this manual are followed. The operator must ensure that all personnel responsible
for working with the servo amplifier have read and understood the product manual.
1.3

Hints for the online edition (PDF format)

Bookmark:
Table of contents and index are active bookmarks.
Table of contents and index in the text:
The lines are active cross references. Click on the desired line and the appropriate page is indica-
ted.
Page/chapter numbers in the text:
Page/chapter numbers with cross references are active. Click at the page/chapter number to reach
the indicated target.
1.4

Symbols used

ð p.
®
SERVOSTAR 640/670 Instructions Manual
12/2010
only by personnel with knowledge of handling electrostatically sensitive
components.
only by electrically qualified personnel.
only by qualified personnel with extensive knowledge of electrical
engineering and drive technology
IEC 60364 and IEC 60664
national accident prevention regulations
Danger to personnel
from electricity and its
effects effects
see page
Danger to maschinery,
general warning
l
special emphasis
General
®
640/670 series
Important no-
tes
7