Protocols And Applications Supported By Acx Series Routers; Figure 12: Acx Series Router Packet Handling - Juniper ACX500 Hardware Manual

Related
Documentation

Protocols and Applications Supported by ACX Series Routers

Table 8: Protocols and Applications Supported by ACX Series Routers
Protocol or Application
Interface and Encapsulation Types
Copyright © 2016, Juniper Networks, Inc.

Figure 12: ACX Series Router Packet Handling

BA and fixed classification
Forwarding class and packet loss priority
MF classification
Policing can overwrite forwarding class
and packet loss priority
Rate limiting
ACX500 Routers Hardware and CLI Terminology Mapping on page 9
ACX Series Universal Access Router Configuration Guide
Table 8 on page 15 contains the first Junos OS Release support for protocols and
applications on ACX Series routers. A dash indicates that the protocol or application is
not supported.
NOTE:
The [
edit logical-systems logical-system-name
supported on ACX Series routers.
The ACX Series routers does not support per-family maximum transmission
unit (MTU) configuration. The MTU applied to
other families as well, even though it can be configured though CLI and
visible in
show interface extensive
for a family is to manipulate the MTU, apply at interface or
and let it calculate for each family automatically. For more information,
see the Knowledge Base (KB) article KB28179 at:
https://kb.juniper.net/InfoCenter/index?page=content&id=KB28179
ACX1000 ACX1100 ACX2000
Scheduling and shaping
Qn
Forwarding class
Qn + packet loss priority WRED
Forwarding class and packet loss priority
determine rewrite value
] hierarchy level is not
family inet
output. The only way to use higher MTU
ACX2100 ACX4000 ACX5048
Chapter 1: System Overview
Scheduling and
shaping
gets applied to
family inet levels,
.
ACX5096 ACX500
15