Power Specifications - Juniper ACX500 Hardware Manual

Table 33: AC Power Cord Specifications for the ACX500 Indoor Router (continued)
Country Model Number
Italy CBL-PWR-C15M-HITEMP-IT
Japan CBL-PWR-C15M-HITEMP-JP
Korea CBL-PWR-C15M-HITEMP-KR
South Africa CBL-PWR-C15M-HITEMP-SA
Switzerland CBL-PWR-C15M-HITEMP-SZ
North America CBL-PWR-C15M-HITEMP-US
United Kingdom CBL-PWR-C15M-HITEMP-UK
Copyright © 2016, Juniper Networks, Inc.
Electrical Specification
250 VAC, 10 A, 50 Hz
125 VAC, 15 A, 50 Hz or 60 Hz
250 VAC, 10 A, 50 Hz
250 VAC, 10 A, 50 Hz
250 VAC, 10 A, 50 Hz
125 VAC, 13 A, 60 Hz
250 VAC, 10 A, 50 Hz
WARNING: The AC power cord for the router is intended for use with the
router only and not for any other use.
WARNING: The attached power cable is only for this product. Do not use the
cable for another product. Translation in Japanese follows:
NOTE: In North America, AC power cords must not exceed approximately
14.75 ft (4.5 m) in length, to comply with National Electrical Code (NEC)
Sections 400-8 (NFPA 75, 5-2.2) and 210-52, and Canadian Electrical Code
(CEC) Section 4-010(3). You can order AC power cords that are in compliance.
CAUTION: Power cords and cables must not block access to device
components or drape where people could trip on them.
NOTE: The router is rated for ambient temperature of 149° F (65° C). Use
power cord of appropriate temperature rating.
Chapter 8: Power Specifications
Plug Type Design Standard
I/3G CEI 23–16
498GJ JIS 8303
VIIG CEE (7) VII
ZA/3 SABS 164/1:1992
12G SEV 1011 / 6534-2
498G NEMA 5-15
BS89/13 BS 1363/A
83