ACX500 Universal Access Router Hardware Guide
148
Figure 65: Power Terminal Location on the ACX500 Outdoor Router
1—
Interface port cover
2—
Cable connector ports with dust cover
Insert the appliance coupler terminal end of the power cord into the appliance inlet
4.
on the power supply. Ensure that the power cord terminal is connected properly.
Insert the DC power cord plug to the power terminal on the router. Ensure that the
5.
power plug sits tight. See
Figure 66: Connecting DC Power to the Router
1— Power terminal
3—
Management port cover
4—
Power port with dust cover
Figure 66 on page
148.
Copyright © 2016, Juniper Networks, Inc.