In Case Of An Electrical Accident; Figure 79: Placing A Component Into An Electrostatic Bag - Juniper ACX500 Hardware Manual

Related
Documentation

In Case of an Electrical Accident

Related
Documentation
Copyright © 2016, Juniper Networks, Inc.
NOTE: The ESD point location in the DC and AC powered ACX500 routers
are the same.

Figure 79: Placing a Component into an Electrostatic Bag

NOTE: The component shown in
and is not supported on ACX Series routers.
Connecting the ACX500 Router to Earth Ground on page 135
If an electrical accident results in an injury, take the following actions in this order:
Use caution. Be aware of potentially hazardous conditions that could cause further
1.
injury.
Disconnect power from the router.
2.
If possible, send another person to get medical aid. Otherwise, assess the condition
3.
of the victim, then call for help.
General Safety Guidelines for Juniper Networks Devices on page 193
General Safety Warnings for Juniper Networks Devices on page 194
Chapter 23: General Safety Guidelines and Warnings
Figure 79 on page 197 is just for reference,
197