ACX500 Universal Access Router Hardware Guide
Table 36: Standard Antenna Parts, Tools, and Other Required Items
Item
GNSS L1/G1 antenna with a frequency band of 1575 to 1610 MHz +/-10 MHz, 3 dB bandwidth
Antenna mount that is used to secure the GNSS antenna
Antenna specific base adaptor
Antenna stanchion or mast
Antenna-specific cable connector
Cable continuity tester
Lightning arrestor and grounding strap
RF antenna installation kit
NO-OX anti-corrosion compound (for cable connections, grounding connector, and ground lugs)
Clamps, cable ties, and so on, to secure cable
Installing the ACX500 GNSS Antenna
92
Figure 35 on page 92
shows the GNSS antenna parts in a typical installation.
Figure 35: Standard GNSS Antenna Parts
To install the GNSS antenna, follow the guidelines specific to the selected GNSS antenna.
Copyright © 2016, Juniper Networks, Inc.