Compliance Statements For Nebs For Acx500 Routers - Juniper ACX500 Hardware Manual

Related
Documentation

Compliance Statements for NEBS for ACX500 Routers

Copyright © 2016, Juniper Networks, Inc.
Verizon TPR.9305 Issue 4 (2011) Verizon NEBS Compliance: NEBS Compliance
Clarification Document
Deutsche Telekom 1TR9 (2008) EMC Specification
British Telecom EMC Immunity Requirements (2007)
IBM C-S 2-0001-005 ESD
IBM C-S 2-0001-012 Radio Frequency Electromagnetic Susceptibility
ITU-T K.21 (2011) Resistibility of telecommunication equipment installed in customer
premises to over voltages and over currents
ITU-T K.20 (2011) Resistibility of telecommunication equipment installed in telecom
centers to over voltages and over currents
Juniper Inductive GND (JIG)
ITU-T G.813: Timing characteristics of SDH equipment slave clocks (SEC)
ITU-T G.703 clause 5: Physical/electrical characteristics of hierarchical digital interfaces
ITU-T G.703 clause 9: Physical/electrical characteristics of hierarchical digital interfaces
ITU-T G.781: Synchronization layer functions
ITU-T G.8261/Y.1361: Timing and synchronization aspects in packet networks
ITU-T G.8262: Timing characteristics of Synchronous Ethernet equipment slave clock
ITU-T G.8263: Timing characteristics of packet-based equipment clocks
ITU-T G.8264: Distribution of timing information through packet networks
ITU-T G.8265.1/8265.2: Architecture and requirements for packet-based frequency
delivery
ITU-T G.8271: Time and phase synchronization aspects of packet networks
IEEE 1588-2008: Precision Clock Synchronization Protocol for Networked Measurement
and Control Systems
Compliance Statements for EMC Requirements for ACX500 Routers on page 236
Compliance Statements for NEBS for ACX500 Routers on page 235
Compliance Statements for Acoustic Noise for ACX500 Routers on page 238
Compliance Statements for Environmental Requirements for Juniper Networks Devices
on page 238
The equipment is suitable for installation as part of the Common Bonding Network
(CBN).
The equipment is suitable for installation in locations where the National Electrical
Code (NEC) applies.
Chapter 29: Agency Approvals and Compliance Statements
235