Protocols And Applications Supported By Acx Series Routers; Figure 8: Acx Series Router Packet Handling; Table 5: Protocols And Applications Supported By Acx Series Routers - Juniper acx1000 User Manual

Related
Documentation

Protocols and Applications Supported by ACX Series Routers

Table 5: Protocols and Applications Supported by ACX Series Routers

Protocol or Application
Interface and Encapsulation Types
Copyright © 2017, Juniper Networks, Inc.

Figure 8: ACX Series Router Packet Handling

BA and fixed classification
Forwarding class and packet loss priority
MF classification
Policing can overwrite forwarding class
and packet loss priority
Rate limiting
ACX2000 and ACX2100 Routers Hardware and CLI Terminology Mapping
Configuring CoS on ACX Series Universal Access Routers
Table 5 on page 9 contains the first Junos OS Release support for protocols and
applications on ACX Series routers. A dash indicates that the protocol or application is
not supported.
NOTE:
The [ edit logical-systems logical-system-name
supported on ACX Series routers.
The ACX Series routers does not support per-family maximum transmission
unit (MTU) configuration. The MTU applied to family
other families as well, even though it can be configured though CLI and
visible in show interface extensive
for a family is to manipulate the MTU, apply at interface or
and let it calculate for each family automatically. For more information,
see the Knowledge Base (KB) article KB28179 at:
https://kb.juniper.net/InfoCenter/index?page=content&id=KB28179
ACX1000 ACX1100 ACX2000
Chapter 1: System Overview and Architecture
Scheduling and shaping
Qn
Forwarding class
Qn + packet loss priority WRED
Forwarding class and packet loss priority
determine rewrite value
] hierarchy level is not
output. The only way to use higher MTU
ACX2100 ACX4000 ACX5048
Scheduling and
shaping
gets applied to
inet
levels,
family inet
.
ACX5096 ACX500
9