Juniper ACX500 Hardware Manual page 135

Copyright © 2016, Juniper Networks, Inc.
Lift and carry the ACX500 outdoor router to the wall where the wall-mounting kit is
9.
attached.
The small eye bolt at the top of the ACX500 outdoor router can be used to lift the
chassis. Use an appropriate rope and lifting tool to hoist the router at the desired
height.
One person must be available to lift the router while another secures the router.
Insert two mounting screws on the top of the outdoor router and secure the screws.
10.
The ACX500 outdoor router is secured onto the wall-mounting kit with the help of
six screws. The top two screws are inserted first into the keyholes on the wall-mounting
kit. These screws help to first hang the router on the wall-mounting kit by taking the
weight out, and when the router comfortably hangs on the unit, secure it by using the
other four screws.
Align the router carefully and then insert the top two chassis-mounting screws attached
11.
to the router in step 10
Figure 41 on page 116.
NOTE: Ensure that the chassis-mounting screws sit properly in the
chassis-mounting bracket keyholes.
into the chassis-mounting bracket keyholes. See
Chapter 12: Installing the ACX500 Router
115