Table 39: Antenna Cable Specification For Trimble Bullet 38Db Gps L1 - Juniper ACX500 Hardware Manual

Table 38: Trimble Bullet 38dB GPS L1 Antenna Specifications (continued)
Parameter
Weight
Connector
Mounting
Table 39: Antenna Cable Specification for Trimble Bullet 38dB GPS L1 Antenna
Antenna
Trimble Bullet 38dB GPS
L1 Antenna 3V (38dB
gain)
Related
Documentation
Copyright © 2016, Juniper Networks, Inc.
Table 39 on page 97 lists the specifications of the cable to be used with the Trimble GPS
antenna.
Coaxial Cable Type
LMR-240 (RG-213)
LMR400
NOTE: Do not use coaxial cable type RG-58 for GNSS antenna. Use coaxial
cable type RG-6 or the cables mentioned in
Preventing Electrostatic Discharge Damage to an ACX500 Router on page 196
Requirements and Specifications for the Recommended GNSS Antenna on page 95
Chapter 9: ACX500 Timing Server Specifications
Specification
0.44 lb (0.2 kg)
TNC (3.3 VDC)
3/4 in. pipe thread or 1–14 in. thread
Maximum Length
150 feet (50 meters)
300 feet (100 meters)
Loss Budget
10 dB/100 feet
5.2 dB/100 feet
Table 39 on page 97.
97