Electrical Safety Guidelines And Warnings; Acx500 General Electrical Safety Guidelines; In Case Of Electrical Accident; General Electrical Safety Guidelines - Juniper ACX500 Hardware Manual

CHAPTER 28

Electrical Safety Guidelines and Warnings

ACX500 General Electrical Safety Guidelines

In Case of Electrical Accident

General Electrical Safety Guidelines

Copyright © 2016, Juniper Networks, Inc.
ACX500 General Electrical Safety Guidelines on page 219
General Electrical Safety Warnings for Juniper Networks Devices on page 220
General Electrical Safety Guidelines and Electrical Codes for Juniper Networks
Devices on page 224
ACX500 AC Power Electrical Safety Guidelines and Warnings on page 224
ACX500 DC Power Electrical Safety Guidelines on page 225
DC Power Electrical Safety Warnings for Juniper Networks Devices on page 226
Site Electrical Wiring Guidelines for Juniper Networks Devices on page 229
If an electrical accident results in an injury, take the following actions in this order:
Use caution. Be aware of potentially hazardous conditions that could cause further
1.
injury.
Disconnect power from the packet transport router.
2.
If possible, send another person to get medical aid. Otherwise, assess the condition
3.
of the victim, then call for help.
Install the packet transport router in compliance with the following local, national, or
international electrical codes:
United States—National Fire Protection Association (NFPA 70), United States
National Electrical Code.
Canada—Canadian Electrical Code, Part 1, CSA C22.1.
Other countries—International Electromechanical Commission (IEC) 60364, Part 1
through Part 7.
Locate the emergency power-off switch for the room in which you are working so that
if an electrical accident occurs, you can quickly turn off the power.
219