Juniper ACX500 Hardware Manual page 158

ACX500 Universal Access Router Hardware Guide
Related
Documentation
138
screws. Use an appropriately sized driver, with a maximum torque capacity
of 5 lb-in. (0.56 Nm) or less. Ensure that the driver is undamaged and
properly calibrated and that you have been trained in its use. You might
want to use a driver that is designed to prevent overtorque when the preset
torque level is achieved.
Verify that the grounding cabling is correct, and verify that it does not touch or block
9.
access to router components, and that it does not drape where people could trip on
it.
Installing and Connecting an ACX500 Indoor Router Overview on page 101
Installing and Connecting an ACX500 Outdoor Router Overview on page 102
Site Preparation Checklist for ACX500 Routers on page 53
Preventing Electrostatic Discharge Damage to an ACX500 Router on page 196
Copyright © 2016, Juniper Networks, Inc.