Figure 44: Securing The Acx500 Outdoor Router On The Pole - Juniper ACX500 Hardware Manual

ACX500 Universal Access Router Hardware Guide
120
The ACX500 outdoor routers has six screw holes at the bottom of the chassis—two
on top, two on center, and two on bottom. The center and bottom screw holes are
for normal screws while the top screw holes are for keyhole screws.
NOTE: Ensure that the top two chassis-mounting screws are secured
tightly in to the chassis as these screws will hold the entire weight of the
chassis initially when attached to the wall.
Lift and carry the ACX500 outdoor router to the pole where the pole-mounting kit is
7.
attached. See Figure 44 on page
The small eye bolt at the rear of the ACX500 outdoor router can be used to lift the
chassis. Use an appropriate rope and lifting tool to hoist the router at the planned
height.
One person must be available to lift the router while another secures the router.

Figure 44: Securing the ACX500 Outdoor Router on the Pole

1— Router
2— Eye bolt
3— Pole
4— Pole-mounting strap screw
120.
5— Pole-mounting strap
6— Bottom chassis-mounting screw
7— Middle chassis-mounting screw
8— Top chassis-mounting screw
Copyright © 2016, Juniper Networks, Inc.