Acx500 Router Ac Power Cord Specifications; Table 33: Ac Power Cord Specifications For The Acx500 Indoor Router - Juniper ACX500 Hardware Manual

ACX500 Universal Access Router Hardware Guide
Related
Documentation

ACX500 Router AC Power Cord Specifications

Table 33: AC Power Cord Specifications for the ACX500 Indoor Router

Country Model Number
Argentina CBL-PWR-C15M-HITEMP-AR
Australia CBL-PWR-C15M-HITEMP-AU
Brazil CBL-PWR-C15M-HITEMP-BR
China CBL-PWR-C15M-HITEMP-CH
Europe (except CBL-PWR-C15M-HITEMP-EU
Italy, Switzerland,
and United
Kingdom)
India CBL-PWR-C15M-HITEMP-IN
Israel CBL-PWR-C15M-HITEMP-IL
82
ACX500 Power Overview on page 49
ACX500 AC Power Electrical Safety Guidelines and Warnings on page 224
ACX500 General Electrical Safety Guidelines on page 219
Each AC power supply has a single AC appliance inlet that requires a dedicated AC power
feed. Most sites distribute power through a main conduit that leads to frame-mounted
power distribution panels, one of which can be located at the top of the rack that houses
the router. An AC power cord connects each power supply to the power distribution panel.
You can order detachable AC power cords, each approximately 8 ft (2.5 m) long that
supply AC power to the router. The C15 appliance coupler at the female end of the cord,
as described by International Electrotechnical Commission (IEC) standard 60320, inserts
into the AC appliance inlet coupler. The plug at the male end of the power cord fits into
the power source receptacle that is standard for your geographic location.
NOTE: For the ACX500 outdoor routers, use the power cord that is purchased
from Juniper Networks, and which is compatible with the ACX500 outdoor
routers. Using a power cord other than that is provided by Juniper Networks
with the router can damage the power terminal. The nominal rating of the
DC power source are +24 VDC, –48 VDC, and –60 VDC. These power cords
are specifically designed to be used only with the specified ACX500 outdoor
routers.
Table 33 on page 82 provides specifications for the AC power cord provided for each
country or region.
Electrical Specification
250 VAC, 10 A, 50 Hz
250 VAC, 10 A, 50 Hz
250 VAC, 10 A, 50 Hz
250 VAC, 10 A, 50 Hz
250 VAC, 10 A, 50 Hz
250 VAC, 10 A, 50 Hz
250 VAC, 10 A, 50 Hz
Plug Type Design Standard
RA/3 IRAM 2073
SAA/3 AS/NZZS 3112-2000
BR/3 NBR 14136
PRC/3 GB2099, GB1002
VIIG CEE (7) VII
ZA/3 SABS 164/1:1992
IL/3G SI 32
Copyright © 2016, Juniper Networks, Inc.