Juniper ACX500 Hardware Manual page 254

ACX500 Universal Access Router Hardware Guide
234
ETSI
ETSI EN 300 386 latest version is V1.6.1 (2010)
ETSI EN 300 019-2-1 v2.1.2 (Class 1.2)
ETSI EN 300 019-2-2 v2.1.2 (Class 2.3)
ETSI EN 300 019-2-3 v2.2.2 (Class 3.2)
ETSI 300 132-2 v2.2.1
ETSI 300 753 (Class 3.2)
ETSI EN 300 440-2
ETSI EN 300 489-1
ETSI EN 300-489-3
ETSI EN 300 019: Environmental Conditions & Environmental Tests for
Telecommunications Equipment
ETSI EN 300 019-2-1 (2000) – Storage, Class T1.2
ETSI EN 300 019-2-2 (1999) – Transportation, Class T2.3
ETSI EN 300 019-2-3 (2003), T 3.2 – Stationary Use at Weather-protected Locations
(ACX Indoor Routers),
ETSI EN 300 019-2-4, T 4.1 – Stationary Use at Non-weather Protected Locations
(ACX Outdoor Routers).
ETSI EN 300 440-1/-2 GPS spurious emission
ETS 300 019-1
ETS 300753 (1997) – Acoustic noise emitted by telecommunications equipment
The router is designed to comply with the following standards:
GR-63-Core Issue 4 (2012) Network Equipment, Building Systems (NEBS) Physical
Protection
GR-1089-Core Issue 6 (May, 2011) EMC and Electrical Safety for Network
Telecommunications Equipment
SR-3580 (2007) NEBS Criteria Levels (Level 3)
IEEE 1613 Environmental and Testing Requirements for Communications Networking
Devices in Electric Power Substations
GR-3108 Generic Requirements for Network Equipment in the Outside Plant (OSP)
GR-487 General Requirements for Electronic Equipment Cabinet
GR-3171 Class 3
Generic Requirements for Electronic Equipment Cabinets
AT&T TP-76200 Issue 16 (2011) Network Equipment Power, Grounding, Environmental,
and Physical Design Requirements
Copyright © 2016, Juniper Networks, Inc.