Figure 43: Installing The Acx500 Outdoor Router Onto The Pole-Mounting Kit - Juniper ACX500 Hardware Manual

Copyright © 2016, Juniper Networks, Inc.
Figure 43: Installing the ACX500 Outdoor Router onto the Pole-Mounting
Kit
1— Router
2— Eye bolt
3— Top chassis-mounting screw
4— Chassis-mounting bracket keyhole
5— Chassis-mounting bracket
6—Pole
Place the joined brackets on the pole where you want to install the ACX500 outdoor
4.
router with the pole-mounting bracket facing the pole, and secure the joined brackets
with the three 5/8-in. through bolts provided.
The three holes present on the pole-mounting brackets are for the through bolts.
Wrap the pole-mounting straps across the pole, and secure the straps with the
5.
pole-mounting strap screws.
NOTE: Apply 20 lb-in. (2.3 Nm) of torque on the screws to ensure that
both the brackets are held tightly.
On the bottom of the router (that is, the surface that will face the pole), secure two
6.
keyhole mounting screws in to the top two chassis-mounting screw holes.
Chapter 12: Installing the ACX500 Router
7— Pole-mounting strap screw
8— Pole-mounting strap
9— Pole-mounting bracket
10— Bottom chassis-mounting screw
11— Middle chassis-mounting screw
119