Acx500 Outdoor Router With Poe Description; Figure 6: Bottom View Of The Acx500 Outdoor Router With Poe; Figure 7: Top View Of The Acx500 Outdoor Router With Poe - Juniper ACX500 Hardware Manual

ACX500 Universal Access Router Hardware Guide

ACX500 Outdoor Router with PoE Description

8
The ACX500 outdoor routers with Power over Ethernet (PoE) contain three Gigabit
Ethernet RJ-45 ports that support PoE+ and three Gigabit Ethernet SFP ports. Out of the
three RJ-45 ports, the port labeled
and support PoE+ with a maximum system PoE power limit of 80 W. The ACX500
0/1/2
outdoor routers with PoE install on a pole or a wall, with the chassis installed in a vertical
orientation with the cables pointing downward and the eye bolt for hoisting the router
pointing upward.
Figure 6 on page 8 and Figure 7 on page 8
from bottom and top.

Figure 6: Bottom View of the ACX500 Outdoor Router with PoE

1— Interface port chamber with weather seal
cover
2— Cable connector ports with weather seal
cap

Figure 7: Top View of the ACX500 Outdoor Router with PoE

1— GPS antenna port
0/1/0 supports PoE++, and the ports labeled
show the ACX500 outdoor router with PoE
3— Management port chamber with weather
seal cover
4— Power port with weather seal cap
2— Eye bolt
Copyright © 2016, Juniper Networks, Inc.
0/1/1