Hal_Timex_Onepulsen_Stop; Hal_Timex_Onepulsen_Start_It; Hal_Timex_Onepulsen_Stop_It; Hal_Timex_Configcommutationevent - ST STM32F2 User Manual

HAL TIM Extension Driver

HAL_TIMEx_OnePulseN_Stop

Function name
Function description
Parameters
Return values

HAL_TIMEx_OnePulseN_Start_IT

Function name
Function description
Parameters
Return values

HAL_TIMEx_OnePulseN_Stop_IT

Function name
Function description
Parameters
Return values

HAL_TIMEx_ConfigCommutationEvent

Function name
Function description
640/1371
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop
(TIM_HandleTypeDef * htim, uint32_t OutputChannel)
Stops the TIM One Pulse signal generation on the complementary
output.
htim: pointer to a TIM_HandleTypeDef structure that
contains the configuration information for TIM module.
OutputChannel: TIM Channel to be disabled. This
parameter can be one of the following values:
TIM_CHANNEL_1: TIM Channel 1 selected
TIM_CHANNEL_2: TIM Channel 2 selected
HAL: status
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT
(TIM_HandleTypeDef * htim, uint32_t OutputChannel)
Starts the TIM One Pulse signal generation in interrupt mode on
the complementary channel.
htim: pointer to a TIM_HandleTypeDef structure that
contains the configuration information for TIM module.
OutputChannel: TIM Channel to be enabled. This parameter
can be one of the following values:
TIM_CHANNEL_1: TIM Channel 1 selected
TIM_CHANNEL_2: TIM Channel 2 selected
HAL: status
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT
(TIM_HandleTypeDef * htim, uint32_t OutputChannel)
Stops the TIM One Pulse signal generation in interrupt mode on
the complementary channel.
htim: pointer to a TIM_HandleTypeDef structure that
contains the configuration information for TIM module.
OutputChannel: TIM Channel to be disabled. This
parameter can be one of the following values:
TIM_CHANNEL_1: TIM Channel 1 selected
TIM_CHANNEL_2: TIM Channel 2 selected
HAL: status
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent
(TIM_HandleTypeDef * htim, uint32_t InputTrigger, uint32_t
CommutationSource)
Configure the TIM commutation event sequence.
DocID028236 Rev 2
UM1940