Ll_Rcc_Hsi_Isready; Ll_Rcc_Hsi_Getcalibration; Ll_Rcc_Hsi_Setcalibtrimming; Ll_Rcc_Hsi_Getcalibtrimming - ST STM32F2 User Manual

UM1940
Return values
Reference Manual to
LL API cross
reference:

LL_RCC_HSI_IsReady

Function name
Function description
Return values
Reference Manual to
LL API cross
reference:

LL_RCC_HSI_GetCalibration

Function name
Function description
Return values
Notes
Reference Manual to
LL API cross
reference:

LL_RCC_HSI_SetCalibTrimming

Function name
Function description
Parameters
Return values
Notes
Reference Manual to
LL API cross
reference:

LL_RCC_HSI_GetCalibTrimming

Function name
Function description
None:
CR HSION LL_RCC_HSI_Disable
__STATIC_INLINE uint32_t LL_RCC_HSI_IsReady (void )
Check if HSI clock is ready.
State: of bit (1 or 0).
CR HSIRDY LL_RCC_HSI_IsReady
__STATIC_INLINE uint32_t LL_RCC_HSI_GetCalibration (void
)
Get HSI Calibration value.
Between: Min_Data = 0x00 and Max_Data = 0xFF
When HSITRIM is written, HSICAL is updated with the sum of
HSITRIM and the factory trim value
CR HSICAL LL_RCC_HSI_GetCalibration
__STATIC_INLINE void LL_RCC_HSI_SetCalibTrimming
(uint32_t Value)
Set HSI Calibration trimming.
Value: Between Min_Data = 0 and Max_Data = 31
None:
user-programmable trimming value that is added to the
HSICAL
Default value is 16, which, when added to the HSICAL value,
should trim the HSI to 16 MHz +/- 1 %
CR HSITRIM LL_RCC_HSI_SetCalibTrimming
__STATIC_INLINE uint32_t LL_RCC_HSI_GetCalibTrimming
(void )
Get HSI Calibration trimming.
DocID028236 Rev 2
LL RCC Generic Driver
1013/1371