ST STM32F2 User Manual page 187

UM1940
__HAL_DCMI_DISABLE_IT
__HAL_DCMI_GET_IT_SOURCE
DCMI Extended Data Mode
DCMI_EXTEND_DATA_8B
Return value:
None
Description:
Disable the specified DCMI interrupts.
Parameters:
__HANDLE__: DCMI handle
__INTERRUPT__: specifies the DCMI
interrupt sources to be enabled. This
parameter can be any combination of the
following values:
Return value:
None
Description:
Check whether the specified DCMI
interrupt has occurred or not.
Parameters:
__HANDLE__: DCMI handle
__INTERRUPT__: specifies the DCMI
interrupt source to check. This parameter
can be one of the following values:
Return value:
The: state of INTERRUPT.
Interface captures 8-bit data on every pixel clock
DocID028236 Rev 2
HAL DCMI Generic Driver
DCMI_IT_VSYNC: VSYNC interrupt
mask
DCMI_IT_LINE: Line interrupt mask
DCMI_IT_FRAME: Frame capture
complete interrupt mask
DCMI_IT_OVR: Overrun interrupt
mask
DCMI_IT_ERR: Synchronization
error interrupt mask
DCMI_IT_VSYNC: VSYNC interrupt
mask
DCMI_IT_LINE: Line interrupt mask
DCMI_IT_FRAME: Frame capture
complete interrupt mask
DCMI_IT_OVR: Overrun interrupt
mask
DCMI_IT_ERR: Synchronization
error interrupt mask
DCMI_IT_VSYNC: VSYNC interrupt
mask
DCMI_IT_LINE: Line interrupt mask
187/1371