Ll_Adc_Isactiveflag_Slv2_Awd1; Ll_Adc_Enableit_Eocs; Ll_Adc_Enableit_Ovr; Ll_Adc_Enableit_Jeos - ST STM32F2 User Manual

LL ADC Generic Driver
Reference Manual to
LL API cross
reference:

LL_ADC_IsActiveFlag_SLV2_AWD1

Function name
Function description
Parameters
Return values
Reference Manual to
LL API cross
reference:

LL_ADC_EnableIT_EOCS

Function name
Function description
Parameters
Return values
Notes
Reference Manual to
LL API cross
reference:

LL_ADC_EnableIT_OVR

Function name
Function description
Parameters
Return values
Reference Manual to
LL API cross
reference:

LL_ADC_EnableIT_JEOS

Function name
750/1371
CSR AWD2 LL_ADC_IsActiveFlag_SLV1_AWD1
__STATIC_INLINE uint32_t
LL_ADC_IsActiveFlag_SLV2_AWD1 (ADC_Common_TypeDef
* ADCxy_COMMON)
Get flag multimode analog watchdog 1 of the ADC slave 2.
ADCxy_COMMON: ADC common instance (can be set
directly from CMSIS definition or by using helper macro
__LL_ADC_COMMON_INSTANCE() )
State: of bit (1 or 0).
CSR AWD3 LL_ADC_IsActiveFlag_SLV2_AWD1
__STATIC_INLINE void LL_ADC_EnableIT_EOCS
(ADC_TypeDef * ADCx)
Enable interruption ADC group regular end of unitary conversion
or end of sequence conversions, depending on ADC configuration.
ADCx: ADC instance
None:
To configure flag of end of conversion, use function
LL_ADC_REG_SetFlagEndOfConversion().
CR1 EOCIE LL_ADC_EnableIT_EOCS
__STATIC_INLINE void LL_ADC_EnableIT_OVR
(ADC_TypeDef * ADCx)
Enable ADC group regular interruption overrun.
ADCx: ADC instance
None:
CR1 OVRIE LL_ADC_EnableIT_OVR
__STATIC_INLINE void LL_ADC_EnableIT_JEOS
(ADC_TypeDef * ADCx)
DocID028236 Rev 2
UM1940