ST STM32F2 User Manual page 617

UM1940
__HAL_TIM_GET_IT_SOURCE
__HAL_TIM_CLEAR_IT
Return value:
The: new state of __FLAG__ (TRUE or
FALSE).
Description:
Check whether the specified TIM interrupt
source is enabled or not.
Parameters:
__HANDLE__: TIM handle
__INTERRUPT__: specifies the TIM
interrupt source to check. This parameter
can be one of the following values:
Return value:
The: state of TIM_IT (SET or RESET).
Description:
Clear the TIM interrupt pending bits.
Parameters:
__HANDLE__: TIM handle
__INTERRUPT__: specifies the interrupt
pending bit to clear. This parameter can be
DocID028236 Rev 2
HAL TIM Generic Driver
interrupt flag
TIM_FLAG_TRIGGER: Trigger
interrupt flag
TIM_FLAG_BREAK: Break interrupt
flag
TIM_FLAG_BREAK2: Break 2
interrupt flag
TIM_FLAG_SYSTEM_BREAK:
System Break interrupt flag
TIM_FLAG_CC1OF:
Capture/Compare 1 overcapture flag
TIM_FLAG_CC2OF:
Capture/Compare 2 overcapture flag
TIM_FLAG_CC3OF:
Capture/Compare 3 overcapture flag
TIM_FLAG_CC4OF:
Capture/Compare 4 overcapture flag
TIM_IT_UPDATE: Update interrupt
TIM_IT_CC1: Capture/Compare 1
interrupt
TIM_IT_CC2: Capture/Compare 2
interrupt
TIM_IT_CC3: Capture/Compare 3
interrupt
TIM_IT_CC4: Capture/Compare 4
interrupt
TIM_IT_COM: Commutation interrupt
TIM_IT_TRIGGER: Trigger interrupt
TIM_IT_BREAK: Break interrupt
617/1371