ST STM32F2 User Manual page 456

HAL RCC Extension Driver
__HAL_RCC_HASH_CLK_SLEEP_ENABLE
__HAL_RCC_CRYP_CLK_SLEEP_DISABLE
__HAL_RCC_HASH_CLK_SLEEP_DISABLE
RCC BitAddress AliasRegion
PLL_TIMEOUT_VALUE
RCC Private macros to check input parameters
IS_RCC_PERIPHCLOCK
IS_RCC_PLLI2SN_VALUE
IS_RCC_PLLI2SR_VALUE
RCC Extended MCOx Clock Config
__HAL_RCC_MCO1_CONFIG
__HAL_RCC_MCO2_CONFIG
456/1371
Description:
Macro to configure the MCO1 clock.
Parameters:
__MCOCLKSOURCE__: specifies the MCO clock
source. This parameter can be one of the following
values:
RCC_MCO1SOURCE_HSI: HSI clock selected
as MCO1 source
RCC_MCO1SOURCE_LSE: LSE clock selected
as MCO1 source
RCC_MCO1SOURCE_HSE: HSE clock
selected as MCO1 source
RCC_MCO1SOURCE_PLLCLK: main PLL
clock selected as MCO1 source
__MCODIV__: specifies the MCO clock prescaler.
This parameter can be one of the following values:
RCC_MCODIV_1: no division applied to MCOx
clock
RCC_MCODIV_2: division by 2 applied to
MCOx clock
RCC_MCODIV_3: division by 3 applied to
MCOx clock
RCC_MCODIV_4: division by 4 applied to
MCOx clock
RCC_MCODIV_5: division by 5 applied to
MCOx clock
Description:
Macro to configure the MCO2 clock.
Parameters:
__MCOCLKSOURCE__: specifies the MCO clock
source. This parameter can be one of the following
values:
RCC_MCO2SOURCE_SYSCLK: System clock
(SYSCLK) selected as MCO2 source
RCC_MCO2SOURCE_PLLI2SCLK: PLLI2S
clock selected as MCO2 source
DocID028236 Rev 2
UM1940