Hal_Tim_Encoder_Stop_It; Hal_Tim_Encoder_Start_Dma; Hal_Tim_Encoder_Stop_Dma - ST STM32F2 User Manual

UM1940
Return values

HAL_TIM_Encoder_Stop_IT

Function name
Function description
Parameters
Return values

HAL_TIM_Encoder_Start_DMA

Function name
Function description
Parameters
Return values

HAL_TIM_Encoder_Stop_DMA

Function name
Function description
Parameters
Channel: TIM Channels to be enabled. This parameter can
be one of the following values:
TIM_CHANNEL_1: TIM Channel 1 selected
TIM_CHANNEL_2: TIM Channel 2 selected
TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2
are selected
HAL: status
HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT
(TIM_HandleTypeDef * htim, uint32_t Channel)
Stops the TIM Encoder Interface in interrupt mode.
htim: pointer to a TIM_HandleTypeDef structure that
contains the configuration information for TIM module.
Channel: TIM Channels to be disabled. This parameter can
be one of the following values:
TIM_CHANNEL_1: TIM Channel 1 selected
TIM_CHANNEL_2: TIM Channel 2 selected
TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2
are selected
HAL: status
HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA
(TIM_HandleTypeDef * htim, uint32_t Channel, uint32_t *
pData1, uint32_t * pData2, uint16_t Length)
Starts the TIM Encoder Interface in DMA mode.
htim: pointer to a TIM_HandleTypeDef structure that
contains the configuration information for TIM module.
Channel: TIM Channels to be enabled. This parameter can
be one of the following values:
TIM_CHANNEL_1: TIM Channel 1 selected
TIM_CHANNEL_2: TIM Channel 2 selected
TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2
are selected
pData1: The destination Buffer address for IC1.
pData2: The destination Buffer address for IC2.
Length: The length of data to be transferred from TIM
peripheral to memory.
HAL: status
HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA
(TIM_HandleTypeDef * htim, uint32_t Channel)
Stops the TIM Encoder Interface in DMA mode.
htim: pointer to a TIM_HandleTypeDef structure that
DocID028236 Rev 2
HAL TIM Generic Driver
597/1371