ST STM32F2 User Manual page 227

UM1940
__HAL_ETH_DMA_ENABLE_IT
__HAL_ETH_DMA_DISABLE_IT
__HAL_ETH_DMA_CLEAR_IT
__HAL_ETH_DMA_GET_FLAG
Return value:
Description:
Parameters:
Return value:
Description:
Parameters:
Return value:
Description:
Parameters:
Return value:
Description:
Parameters:
DocID028236 Rev 2
HAL ETH Generic Driver
ETH_MAC_FLAG_MMCT : MMC
transmit flag
ETH_MAC_FLAG_MMCR : MMC
receive flag
ETH_MAC_FLAG_MMC : MMC
flag
ETH_MAC_FLAG_PMT : PMT flag
The: state of ETHERNET MAC flag.
Enables the specified ETHERNET DMA
interrupts.
__HANDLE__: : ETH Handle
__INTERRUPT__: specifies the
ETHERNET DMA interrupt sources to
be enabled
None
Disables the specified ETHERNET DMA
interrupts.
__HANDLE__: : ETH Handle
__INTERRUPT__: specifies the
ETHERNET DMA interrupt sources to
be disabled.
None
Clears the ETHERNET DMA IT pending
bit.
__HANDLE__: : ETH Handle
__INTERRUPT__: specifies the interrupt
pending bit to clear.
None
Checks whether the specified
ETHERNET DMA flag is set or not.
227/1371