ST STM32F2 User Manual page 768

LL ADC Generic Driver
LL_ADC_INJ_TRIG_EXT_TIM4_CH1
LL_ADC_INJ_TRIG_EXT_TIM4_CH2
LL_ADC_INJ_TRIG_EXT_TIM4_CH3
LL_ADC_INJ_TRIG_EXT_TIM4_TRGO
LL_ADC_INJ_TRIG_EXT_TIM5_CH4
LL_ADC_INJ_TRIG_EXT_TIM5_TRGO
LL_ADC_INJ_TRIG_EXT_TIM8_CH2
LL_ADC_INJ_TRIG_EXT_TIM8_CH3
LL_ADC_INJ_TRIG_EXT_TIM8_CH4
LL_ADC_INJ_TRIG_EXT_EXTI_LINE15
ADC group injected - Automatic trigger mode
LL_ADC_INJ_TRIG_INDEPENDENT
LL_ADC_INJ_TRIG_FROM_GRP_REGULAR
768/1371
compare: input capture or output capture).
Trigger edge set to rising edge (default setting).
ADC group injected conversion trigger from
external IP: TIM4 channel 1 event (capture
compare: input capture or output capture).
Trigger edge set to rising edge (default setting).
ADC group injected conversion trigger from
external IP: TIM4 channel 2 event (capture
compare: input capture or output capture).
Trigger edge set to rising edge (default setting).
ADC group injected conversion trigger from
external IP: TIM4 channel 3 event (capture
compare: input capture or output capture).
Trigger edge set to rising edge (default setting).
ADC group injected conversion trigger from
external IP: TIM4 TRGO. Trigger edge set to
rising edge (default setting).
ADC group injected conversion trigger from
external IP: TIM5 channel 4 event (capture
compare: input capture or output capture).
Trigger edge set to rising edge (default setting).
ADC group injected conversion trigger from
external IP: TIM5 TRGO. Trigger edge set to
rising edge (default setting).
ADC group injected conversion trigger from
external IP: TIM8 channel 2 event (capture
compare: input capture or output capture).
Trigger edge set to rising edge (default setting).
ADC group injected conversion trigger from
external IP: TIM8 channel 3 event (capture
compare: input capture or output capture).
Trigger edge set to rising edge (default setting).
ADC group injected conversion trigger from
external IP: TIM8 channel 4 event (capture
compare: input capture or output capture).
Trigger edge set to rising edge (default setting).
ADC group injected conversion trigger from
external IP: external interrupt line 15. Trigger
edge set to rising edge (default setting).
ADC group injected conversion trigger
independent. Setting mandatory if ADC
group injected injected trigger source is
set to an external trigger.
ADC group injected conversion trigger
from ADC group regular. Setting compliant
only with group injected trigger source set
to SW start, without any further action on
ADC group injected conversion start or
DocID028236 Rev 2
UM1940