HAL ETH Generic Driver
__HAL_ETH_WAKEUP_EXTI_ENABLE_I
T
__HAL_ETH_WAKEUP_EXTI_DISABLE_I
T
__HAL_ETH_WAKEUP_EXTI_ENABLE_E
VENT
__HAL_ETH_WAKEUP_EXTI_DISABLE_
EVENT
__HAL_ETH_WAKEUP_EXTI_GET_FLAG
__HAL_ETH_WAKEUP_EXTI_CLEAR_FL
AG
__HAL_ETH_WAKEUP_EXTI_ENABLE_R
ISING_EDGE_TRIGGER
234/1371
Return value:
Description:
Return value:
Description:
Return value:
Description:
Return value:
Description:
Return value:
Description:
Return value:
Description:
Return value:
Description:
DocID028236 Rev 2
the maximum value
ETH_MMC_IT_TGFMSC: When Tx
good multi col counter reaches half
the maximum value
ETH_MMC_IT_TGFSC : When Tx
good single col counter reaches
half the maximum value
None
Enables the ETH External interrupt line.
None
Disables the ETH External interrupt line.
None
Enable event on ETH External event
line.
None.
Disable event on ETH External event
line.
None.
Get flag of the ETH External interrupt
line.
None
Clear flag of the ETH External interrupt
line.
None
Enables rising edge trigger to the ETH
UM1940
Need help?
Do you have a question about the STM32F2 and is the answer not in the manual?
Questions and answers