HAL PWR Generic Driver
PWR_EXTI_LINE_PVD
PWR PVD Mode
PWR_PVD_MODE_NORMAL
PWR_PVD_MODE_IT_RISING
PWR_PVD_MODE_IT_FALLING
PWR_PVD_MODE_IT_RISING_FALLING
PWR_PVD_MODE_EVENT_RISING
PWR_PVD_MODE_EVENT_FALLING
PWR_PVD_MODE_EVENT_RISING_FALLING
PWR PVD Mode Mask
PVD_MODE_IT
PVD_MODE_EVT
PVD_RISING_EDGE
PVD_FALLING_EDGE
PWR Register alias address
PWR_OFFSET
PWR_CR_OFFSET
PWR_CSR_OFFSET
PWR_CR_OFFSET_BB
PWR_CSR_OFFSET_BB
PWR Regulator state in SLEEP/STOP mode
PWR_MAINREGULATOR_ON
PWR_LOWPOWERREGULATOR_ON
PWR SLEEP mode entry
PWR_SLEEPENTRY_WFI
PWR_SLEEPENTRY_WFE
PWR STOP mode entry
PWR_STOPENTRY_WFI
PWR_STOPENTRY_WFE
PWR WakeUp Pins
PWR_WAKEUP_PIN1
414/1371
External interrupt line 16 Connected to the PVD EXTI Line
DocID028236 Rev 2
basic mode is used
External Interrupt Mode with Rising edge
trigger detection
External Interrupt Mode with Falling
edge trigger detection
External Interrupt Mode with
Rising/Falling edge trigger detection
Event Mode with Rising edge trigger
detection
Event Mode with Falling edge trigger
detection
Event Mode with Rising/Falling edge
trigger detection
UM1940
Need help?
Do you have a question about the STM32F2 and is the answer not in the manual?