ST STM32F2 User Manual page 530

HAL SD Generic Driver
__HAL_SD_CLEAR_IT
SD Handle Structure definition
SD_InitTypeDef
SD_TypeDef
530/1371
interrupt
Return value:
The: new state of SD IT (SET or RESET).
Description:
Clear the SD's interrupt pending bits.
Parameters:
__HANDLE__: SD Handle
__INTERRUPT__: specifies the interrupt pending bit to
clear. This parameter can be one or a combination of
the following values:
SDIO_IT_CCRCFAIL: Command response
received (CRC check failed) interrupt
SDIO_IT_DCRCFAIL: Data block sent/received
(CRC check failed) interrupt
SDIO_IT_CTIMEOUT: Command response
timeout interrupt
SDIO_IT_DTIMEOUT: Data timeout interrupt
SDIO_IT_TXUNDERR: Transmit FIFO underrun
error interrupt
SDIO_IT_RXOVERR: Received FIFO overrun
error interrupt
SDIO_IT_CMDREND: Command response
received (CRC check passed) interrupt
SDIO_IT_CMDSENT: Command sent (no
response required) interrupt
SDIO_IT_DATAEND: Data end (data counter,
SDMMC_DCOUNT, is zero) interrupt
SDIO_IT_SDIOIT: SD I/O interrupt received
interrupt
Return value:
None
DocID028236 Rev 2
UM1940