ST STM32F2 User Manual page 612

HAL TIM Generic Driver
TIM_DMA_CC1
TIM_DMA_CC2
TIM_DMA_CC3
TIM_DMA_CC4
TIM_DMA_COM
TIM_DMA_TRIGGER
TIM Encoder Mode
TIM_ENCODERMODE_TI1
TIM_ENCODERMODE_TI2
TIM_ENCODERMODE_TI12
TIM ETR Polarity
TIM_ETRPOLARITY_INVERTED
TIM_ETRPOLARITY_NONINVERTED
TIM ETR Prescaler
TIM_ETRPRESCALER_DIV1
TIM_ETRPRESCALER_DIV2
TIM_ETRPRESCALER_DIV4
TIM_ETRPRESCALER_DIV8
TIM Event Source
TIM_EVENTSOURCE_UPDATE
TIM_EVENTSOURCE_CC1
TIM_EVENTSOURCE_CC2
TIM_EVENTSOURCE_CC3
TIM_EVENTSOURCE_CC4
TIM_EVENTSOURCE_COM
TIM_EVENTSOURCE_TRIGGER
TIM_EVENTSOURCE_BREAK
TIM Exported Macros
__HAL_TIM_RESET_HANDLE_STATE
__HAL_TIM_ENABLE
612/1371
Polarity for ETR source
Polarity for ETR source
No prescaler is used
ETR input source is divided by 2
ETR input source is divided by 4
ETR input source is divided by 8
Description:
Reset TIM handle state.
Parameters:
__HANDLE__: TIM handle
Return value:
None
Description:
Enable the TIM peripheral.
DocID028236 Rev 2
UM1940