Ll_Rtc_Time_Get - ST STM32F2 User Manual

LL RTC Generic Driver
Parameters
Return values
Notes
Reference Manual to
LL API cross
reference:

LL_RTC_TIME_Get

Function name
Function description
Parameters
Return values
Notes
Reference Manual to
LL API cross
reference:
1072/1371
RTCx: RTC Instance
Format12_24: This parameter can be one of the following
values:
LL_RTC_TIME_FORMAT_AM_OR_24
LL_RTC_TIME_FORMAT_PM
Hours: Value between Min_Data=0x01 and Max_Data=0x12
or between Min_Data=0x00 and Max_Data=0x23
Minutes: Value between Min_Data=0x00 and
Max_Data=0x59
Seconds: Value between Min_Data=0x00 and
Max_Data=0x59
None:
Bit is write-protected. LL_RTC_DisableWriteProtection
function should be called before.
It can be written in initialization mode only
(LL_RTC_EnableInitMode function)
TimeFormat and Hours should follow the same format
TR PM LL_RTC_TIME_Config
TR HT LL_RTC_TIME_Config
TR HU LL_RTC_TIME_Config
TR MNT LL_RTC_TIME_Config
TR MNU LL_RTC_TIME_Config
TR ST LL_RTC_TIME_Config
TR SU LL_RTC_TIME_Config
__STATIC_INLINE uint32_t LL_RTC_TIME_Get (RTC_TypeDef
* RTCx)
Get time (hour, minute and second) in BCD format.
RTCx: RTC Instance
Combination: of hours, minutes and seconds (Format:
0x00HHMMSS).
if shadow mode is disabled (BYPSHAD=0), need to check if
RSF flag is set before reading this bit
Read either RTC_SSR or RTC_TR locks the values in the
higher-order calendar shadow registers until RTC_DR is read
(LL_RTC_ReadReg(RTC, DR)).
helper macros __LL_RTC_GET_HOUR,
__LL_RTC_GET_MINUTE and __LL_RTC_GET_SECOND
are available to get independently each parameter.
TR HT LL_RTC_TIME_Get
TR HU LL_RTC_TIME_Get
TR MNT LL_RTC_TIME_Get
TR MNU LL_RTC_TIME_Get
TR ST LL_RTC_TIME_Get
TR SU LL_RTC_TIME_Get
DocID028236 Rev 2
UM1940