Table of Contents
Advertisement
Chapter 2 Preparations
1.5
Removing the Front Bezel
Remove the front bezel by using the following procedure.
1.
See steps 1 to 3 in Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
2.
Using the indentation on the left side of the front bezel,
pull the front bezel forward until the tab pops out of the
frame.
3.
Continue opening the front bezel until the three tabs on
the right side of the server pop out and the front bezel
is completely removed.
4.
Carefully lay the server on its side, right side down.
Express5800/T110g-E User's Guide
1. Installing Internal Optional Devices
47
Advertisement
Table of Contents
