Table of Contents
Advertisement
Chapter 2 Preparations
1.4
Removing the Front Bezel
Remove the front bezel by using the following procedure.
1.
See steps 1 to 3 in Chapter 2 (1.2 Overview of Installation and Removal) for preparations.
2.
Using the indentation on the left side of the front
bezel, pull the front bezel forward until the tab pops
out of the frame.
3.
Continue opening the front bezel until the three tabs
on the right side of the server pop out and the front
bezel is completely removed.
4.
Carefully lay the server on its side, right side down.
36
Express5800/T110j User's Guide
1. Installing Internal Optional Devices
Advertisement
Table of Contents
