Chapter 2; Installing The Nec Esmpro Manager; Before Installing; About A Virtual Directory The Web Component Creates - NEC Express5800 series User Manual

Chapter 2

Installing the NEC ESMPRO Manager

BEFORE INSTALLING

About a Virtual Directory the Web Component Creates

A virtual directory "esmpro" is created at the first web site (it is usually "Default Web Site") on the
Web Server by installing the Web Component. If a virtual directory "esmpro" already exists, the
directory will be overwritten. Therefore, please change the directory name before installing the Web
Component.

Setting Up Network Services

The NEC ESMPRO Manager uses TCP/IP as its communication protocol. Please set up network
services so that TCP/IP works properly.

Setting Up the NEC ESMPRO User Group

To use the NEC ESMPRO Manager, you must belong to a user group called the NEC ESMPRO
User Group for security purposes.
NOTE:
support creating optional user groups, Computer Administrator meets
the requirement.
The NEC ESMPRO User Group name should be determined during the installation. The Manager
setup names it "Administrators" by default.
If you want to specify another user group name, you must create it before installing the NEC
ESMPRO Manager and specify the group name during installation. The NEC ESMPRO User Group
is case sensitive.
Also, to make this security feature function effectively, please install the NEC ESMPRO Manager
on a hard drive formatted with NTFS.
NOTE:
group, make sure that there is no local group having the same name.
Also, when you install the NEC ESMPRO Manager on a backup
domain Controller, you must create it as a global group.
If you are using Windows XP Home Edition, which doesn't
When you create the NEC ESMPRO User Group as a global