Lsi Software Raid Configuration Utility Operating Procedure; Creating And Adding A Configuration - NEC Express5800 Series Maintenance Manual

Chapter 2 Convenient Features
4.3

LSI Software RAID Configuration Utility Operating Procedure

4.3.1 Creating and adding a configuration

1. Run the LSI Software RAID Configuration Utility.
2. To create a new configuration, select Configure and then New Configuration from the TOP menu
(Management Menu).
To add a configuration, select Configure and then View/Add Configuration.
Run the LSI Software RAID Configuration Utility
Set new configuration data (pack/Virtual Drive settings)
Check the Virtual Drive settings
Initialize the Virtual Drive
Execute a Consistency Check
Exit the LSI Software RAID Configuration Utility
Important
When a configuration is created by selecting New Configuration, the
existing configuration data is cleared. To add configuration data to the
existing configuration, select View/Add Configuration.
• When Easy Configuration is selected to create a configuration, the Virtual
Note
Drive capacity cannot be specified. If you want to specify the capacity, select
New Configuration or View/Add Configuration.
• For RAID0, skip Consistency Check.
Express5800/B120e-h Maintenance Guide
4. RAID System Configuration
97