EG–80
ENGINE TROUBLESHOOTING
12. INSTALL RH EXHAUST MANIFOLD
(a) Install a new gasket and the exhaust manifold with new six
(b) Install the heat insulator with the three nuts.
13. INSTALL OIL DIPSTICK
14. INSTALL LH EXHAUST MANIFOLD
(a) Install a new gasket and the exhaust manifold with six new
(b) Install the heat insulator with the bolt and two nuts.
–
ENGINE MECHANICAL
nuts. Uniformly tighten the nuts in several passes.
Torque: 39 N m (400 kgf cm, 29 ft lbf)
Install the oil dipstick with the bolt.
nuts. Uniformly tighten the nuts in several passes.
Torque: 39 N m (400 kgf cm, 29 ft lbf)