Oil And Filter Replacement; Drain Engine Oil; Replace Oil Filter - Toyota 3VZ–FE Troubleshooting Manual

Table of Contents

Advertisement

EG–292
ENGINE TROUBLESHOOTING

OIL AND FILTER REPLACEMENT

1.
(a) Remove the oil filler cap.
(b) Remove the oil drain plug, and drain the oil into a container.
2.
(a) Using SST, remove the oil filter.
(b) Check and clean the oil filter installation surface.
LUBRICATION SYSTEM
CAUTION:
Prolonged and repeated contact with mineral oil will
result in the removal of natural fats from the skin, leading
to dryness, irritation and dermatitis. In addition, used
engine oil contains potentially harmful contaminants
which may cause skin cancer.
Care should be taken, therefore, when changing engine,
oil to minimize the frequency and length of time your skin
is exposed to used engine oil. Protective clothing and
gloves that cannot be penetrated by oil should be worn.
The skin should be thoroughly washed with soap and
water, or use waterless hand cleaner, to remove any used
engine oil. Do not use gasoline, thinners, or solvents.
In order to preserve the environment, used oil and used
oil filter must be disposed of only at designated disposal
sites.

DRAIN ENGINE OIL

REPLACE OIL FILTER

SST 09228–07500
EG097–01

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents